MUSTANG UPPER CONTROL ARMS
Craig Bunn	(Pic click)	Street-Launch - Recommended for cars running Low 11's. For '79 and newer Mustangs equipped with the 8.8 rear end. Includes Polyeurathane Chassis Bushings, Heim ends on the axle side and new hardware. Upgrade Kit offered below ~$260.00~ Includes suspension plotting	Chet Caminita
Chris Svader	(Pic click)	Pro-Launch #1 - These will handle cars running Low 10's. For '79 and newer Mustangs equipped with the 8.8 rear end. Uses 1/2" control arm bolts, 1/2" Chromemoly Heim ends and hardware. ~$260.00~ Includes suspension plotting	Chris Evans
	(Pic click)	Pro-Launch #2 - This will handle cars running well into the 7's. For '79 and newer Mustangs equipped with the 8.8 rear end. Uses LARGER 5/8" control arm bolts, 5/8"x5/8" Chromemoly Heim ends, 1 1/4" dia Chromemoly control arms, 3/16" thick support brackets and hardware. ~$360.00~ Includes suspension plotting **Optional 1/2" bolts available upon request.	Mike Dees
Glen Jones	(Pic click)	Pro-Launch Track Locator If you already have a Prolaunch #1 OR #2 upper control arm kit then this is what you need. Center the rearend under your car the EASY WAY! Increase launch and top end stabilty! Specify control arm bolt size when ordering: 1/2" bolts or 5/8" bolts Fits all exhaust systems. Bolt-in. No welding necessary. This part ONLY works with the Prolaunch #1 and #2 Upper Control Arm kits. Not recommended for use with Street Launch kit. ~$68.00~**	Mark Stein
MUSTANG ANTIROLL BARS (ARB's)
Thomas Newton	(Pic click)	#1 ARB (Anti-Roll Bar) STREET More Room For 3" tailpipes TIG welded Chromemoly construction Replaceable Polyurethane Chassis Bushings 1/2" heim ends for down links * Weld-in or Bolt-in Construction More clearance for 3" exhaust ~$330.00~**	Dan Russo
	(Pic click)	#2 ARB (Anti-Roll Bar) RACE More Room for 3" tailpipes TIG welded Chromemoly construction Replaceable Bronze Chassis Bushings 1/2" heim ends for down links * Weld-in or Bolt-in Construction More clearance for 3" exhaust ~$330.00~**	Joel Hollander
Rex McLaren	(Pic click)	#3 ARB (Anti-Roll Bar) RACE More Room for 3" tailpipes TIG welded Chromemoly construction Frame Mount WELD-IN construction Bronze Chassis Bushings 1/2" heim ends for down links More clearance for 3" exhaust ~$238.00~**
Anti-Roll bars still need the down link tabs welded to the axle tubes. Rest of Anti-Roll bar kit can be bolted or welded in but welding will provide the most durability and is recommeded. *The down links are placed closer together and the pivot busings are moved higher and forward in the frame allowing more room for over-the-axle exhaust systems.
MUSTANG LOWER CONTROL ARMS
Joe Lesniak	(Pic click)	LCA #1 Lower Control Arms Direct Bolt-In with Solid bushings on both ends. TIG welded Chromemoly Single Adjustable 5/8" x 1/2" Chromemoly Heim ends Standard with 1/2" control arm bolts With Spring perches Does not use swaybar. ~$175.00~ **Optional 5/8" bolts available upon request.
Adam Jude			Troy Chapman
	(Pic click)	LCA #3 Offset Chromemoly Lower Control Arms TIG welded Chromemoly Double Adjustable Offset for larger tires 5/8"x5/8" Chromemoly Heim ends, LARGER 5/8" control arm bolts No Spring perches ~$185.00~ **Optional 1/2" bolts available upon request.	Scott Holbrook
Randy Seuss

EXTRA's You asked for
	(Pic click)	Body Decals These are done in a Dark Silver outline that shows the cars body color through the letters. Two different sizes available. Small: 19" long x 4" tall Large: 26" long x 5.5" tall ~$30.00 pair ~ Your choice of size includes TWO decals (add note in Coments Box when ordering)	Trevor Berkheiser
Courtney Rogers	(Pic click)	Street Launch Upper Control Arm Upgrade Kit Update your existing Prolaunch #1 kit to a Street Launch Kit. Includes Polyeurathane Chassis Bushings, Control Arms, Chromemoly Heim ends for axle side, and 12mm chassis hardware and 1/2" heim end bolts. ~$160.00~ Will not work without having an existing Prolaunch #1 UCA kit.	Jeff Lange
Kevin Crider	(Pic click)	Upper Control Arm Upgrade Kit Update your Prolaunch #1 kit to a Prolaunch #2 Kit. Includes Chromemoly control arms, LARGER 5/8" control arm bolts, 5/8"x5/8" Chromemoly Heim ends, 5/8" control arm bolts, etc. Redrilling of your existing brackets to 5/8" is required. ~$130.00~
		Antiroll Bar Down Link Kit Lose a down link? Need a Christmas Idea? This kit contains 2 ARB down links, heim ends with jam nuts and new hardware. ~$50.00~	Dennis Bickford
Drew Wallace		Antiroll Bar Bronze Bushing Kit Need a Christmas Idea? Want to train your goldfish to jump through hoops? OR update your Street Antiroll Bar to a Race Antiroll Bar with these bolt-in bushings. Uses your existing hardware. ~$33.00~
		Antiroll Bar Weld-In, Bronze Bushing Kit These are the weld-in bushings that are used on the #3 ARB. These come with grease zerks already installed. ~$37.00~	Jeff Thomas
		Anti-Roll Bar Downlink Mounting Tabs This kit contains four Downlink Mounting Tabs. ~$5.00~	Jeff Thomas

Bernard Newton			Steve Illes	Bill Fischer	Chad Miller
Don't see something you need? Submit your ideas and let me know! Thank You Kevin Slaby