Control arm LENGTH is not the actual length. It is the parallel/projected length along the horizontal axis.

Control arm bolts are measured from the ground up to the center of the bolts. Measurements must be within 1/8" (=.125") for best results.

Projected Upper Control Arm Length:	Projected Lower Control Arm Length:
Rear Upper Control Arm Bolt Height:	Rear Lower Control Arm Bolt Height:
Front Upper Control Arm Bolt Height:	Front Lower Control Arm Bolt Height:
Rear Car Weight:	Front Car Weight:
Center of Gravity Height (or Camshaft Height):	Wheelbase:
Tire Diameter:

Plotted below is YOUR geometry.
The AntiSquat value is 111.31%

Instant Center Lenth: 52.76"
Instant Center Height: 10.47"